Lifts and Paddock Stands

!

FRONT AND REAR PADDOCK STAND SET

PDS2PC
Paddock Stands. Bike Tek front and rear paddock stands allow easy and safe lifting of wheels for most repair and maintenance jobs. Extra heavy duty construction, these stands are available in red finish, supplied with front under-fork or rear swing-arm cup adaptors. A bobbin hook kit is available for rear stands. Features: Spring loaded quick release under fork and cup adaptors. HD oil resistant wheels. Protective rubber base bungs. Front paddock stands MUST be used in conjunction with a rear paddock stand. Series 3 paddock stands utilise a unique design to create a sturdier and stronger stand, the revised handle shape offers better handling for lifting motorcyles.
Front and Rear Stand Set

AMERICANA HYDRAULIC MOTORCYCLE LIFT FOR CUSTOM / UNFAIRED BIKES

PDSAMER01
Americana Hydraulic Workshop Lift. Unique heavy weight hydraulic lift, suitable to hoist unfaired motorcycles including choppers and cruisers, MX bikes and ATV's. Perfect for cleaning, servicing and adding accessories. Manually operated by foot, a hydraulic ram lifting up to 600kgs from height of 146mm (5 3/4") up to 419mm (16 1/2") with hand release valve lowering system. Added security of side-locking security bars. Wheel-mounted for on-stand bike manoeuvring, complete with pull-handle. Manoeuvring pull handle. Lowest clearance 15.5cm.

AMERICANA 2 HYDRAULIC MOTORCYCLE LIFT FOR HARLEYS / CUSTOM BIKES

PDSAMER02
Americana 2 Hydraulic Workshop Lift. Unique heavy weight hydraulic lift, designed specifically to lift lower sitting framed bikes, perfect for Harley Davidson's. Ideal for cleaning, servicing and adding accessories. Manually operated by foot, a hydraulic ram lifting up to 600kgs from height of 121mm (4 3/4") up to 404mm (15 3/4") with hand release valve lowering system. Added security of side-locking security bars. Wheel-mounted for on-stand bike manoeuvring, complete with pull-handle. Manoeuvring pull handle. Lowest clearance 13cm.

WHEEL CHOCK TUBULAR

PDSCHK15
Wheel Chock. One piece construction tubular wheel chock. Supports front wheel of bike during storage and transit. Fully adjustable to fit wheels 12" to 18" Features pivot clamp which locks the front wheel securely by the bikes's weight. Can be bolted to ground.

WHEEL CHOCK TUBULAR - FLAT PACKED SELF-ASSEMBLY UNIT - PDSCHK17

PDSCHK17

Self-Assembly Wheel Chock. Supports front wheel of bike during storage and transit. Fully adjustable to fit whels 12" to 18" (adaptor kit available to convert to 21") Features pivot clamp which locks the front wheel securely by the bike's weight. Can be bolted to ground. Note: Bike must also be secured using tie-down straps

PDSCHK17

WHEEL CHOCK 21" WHEEL CONVERSION ADAPTER KIT (FOR USE WITH PDSCHK17)

PDSCHK19
Self Assembly Wheel Chock. 21" wheel adaptor kit. Replacement support strut converts the self-assembly wheel chock to fit wheels up to 21". Note: Bike must also be secured using tie-down straps

WHEEL BRACE BLACK 160mm WIDTH

PDSCHK21
Wheel Brace. This steel tubing wheel brace bolts into the ground providing a base for motorcycle wheels to be located. Can be fixed in vehicles and on trailers for increased stability in transit, equally suitable bolted on the floor for parking aid and a security lock point. 160mm width. Fittings not supplied. NB: Bike should always be secured by tie-down straps, or with the bike's centre/side stand.

BIKETEK 1 piece WHEEL CHOCK WIDTH ADJUSTABLE

PDSCHK23
Bike Tek Adjustable Wheel Chock. 1pc construction wheel chock provides excellent stability of motorcycles in transit and storage. 38mm tubular steel costruction. Steel base-plate for front wheel location features 2 side-plates to grip front wheel. Side-plates are lockable and width adjustable up to 8" maximum, to ensure secure fit. Can be used free-standing, but can also be permanetly fixed to ground or inside vehicle by via 2 fixing locations (fittings not supplied) For use in several locations an optional quick-release plate is available, enabling the wheel chock to be removed quickly and easily - ideal if the chock is used inside a vehicle. The quick-release plate can be bolted to any fixed surface via the 4 fixing location (fittings not supplied), the wheel- chock simply connected by 1 bolt- fitting. NB: Intended for use on front wheel of motorcycles only.
Adjustable Wheel Chock

BIKETEK QUICK RELEASE BASE PLATE FOR WHEEL CHOCK

PDSCHK25
Bike Tek Adjustable Wheel Chock. 1pc construction wheel chock provides excellent stability of motorcycles in transit and storage. 38mm tubular steel costruction. Steel base-plate for front wheel location features 2 side-plates to grip front wheel. Side-plates are lockable and width adjustable up to 8" maximum, to ensure secure fit. Can be used free-standing, but can also be permanetly fixed to ground or inside vehicle by via 2 fixing locations (fittings not supplied) For use in several locations an optional quick-release plate is available, enabling the wheel chock to be removed quickly and easily - ideal if the chock is used inside a vehicle. The quick-release plate can be bolted to any fixed surface via the 4 fixing location (fittings not supplied), the wheel- chock simply connected by 1 bolt- fitting. NB: Intended for use on front wheel of motorcycles only.
Quick-release base plate

BIKETEK CENTRE STAND BIKE MOVER

PDSCTR07
Centre Stand Mover. Use this stand to manoeuver motorcycles with centre-stands where space is restricted. Centre stand locates on the plate, 360* casters allow bike to be moved in any direction. Complete with brake mechanism. Ideal for workshop, display room and home garage use. Max load: 150kg.